RUCO Inks

About RUCO Inks

Solvent-based Inks

Metallic Inks

Solvent Additives

Substrate Look-up

MSDS Sheets

Technical Data Sheets

Environmental & Safety

Contact RUCO Inks

RUCO Solvent-based Pad & Screen Printing Inks

450-JK

Versatile one component pad or screen printing ink for multi-plastic printing

450-JK Series Overview

Applications 450-JK ABS X Acrylates X Thermosets   Glass   Lacquered Substrates X Ceramics   Metal   Nylon   Powder Coatings   Paper / Cardboard X PET/PETG   Polyacetal   Polyamid   Polycarbonate X Polyolefines (PE/PP)   Polystyrene X Polyurethane   PU Foam (Stress Balls)   PVC (rigid) X PVC (flexible)

X Suitable as a one or two component ink X Suitable as a two component ink

Technical Data Sheet

Universally suitable, glossy, one-component screen printing ink for printing unplasticized and plasticized PVC, ABS, acrylic sheet, polystyrene, polyamide, polycarbonate, polyester, paper and cardboard. Good abrasion, blocking, cutting and punching resistance as well as stacking and thermoforming resistance are the key properties of these physically drying inks. Ink series 450 JK is lightfast, weatherproof and resistant to oils, fats and alcohol.

The basic ink mixing system of series 450-JK consists of 12 basic colors (G scale) and can be used to mix a wide range of shades, including 22 standard opaque, ready to print colors. Practically tested mixing formulas are available for many different color standards, e.g. Pantone®, HKS, RAL, NCS etc.

Usage Instructions

Pad Printing: Add 15-20% 38472 Thinner
Screen Printing: Add 15-20% #11 Retarder
Curing: Air dry within 1 hour, or heat at 175°F for 5 minutes

This series also shows good resistance to untreated PP material with the addition of 20% 100-VR-1260 Adhesion Modifier

Return to Top