RUCO Solvent-based Pad & Screen Printing Inks
10-KK
Two component epoxy system for pad or screen printing glass, metals and many plastic substrates
10-KK Series Overview
| ||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
High-gloss, two-component screen printing ink for printing pretreated polyolefins (polyethylene, polypropylene), polyamide, polycarbonate, thermosets, glass, metal, wood, ceramics and other hard materials. Very smooth flow, good permanent flexibility and rapid touch/complete drying are the key properties of these physically drying, reactive-curing inks. Ink series 10 KK is resistant to oils, fats, alcohol, wetting agents, acids, weak alkalis and most solvents. It is not resistant to phenol-containing fill products.
The basic ink mixing system of series 10-KK consists of 12 basic colors (G scale) and can be used to mix a wide range of shades, including 22 standard opaque, ready to print colors. Practically tested mixing formulas are available for many different color standards, e.g. Pantone®, HKS, RAL, NCS etc.
The range also includes bronze shades and overprint varnishes for special applications.
Usage Instructions
Glass/Ceramic/Metals Printing
Pad Printing: Add 15-20% 35696 Thinner and 20% 100-VR-1286 Hardener
Screen Printing: Add 15-20% 38693 Retarder and 20% 100-VR-1286 Hardener
Curing: Heat at 300°F for 15 minutes
Plastic Printing
Pad Printing: Add 15-20% 38571 Thinner and 20% 37172 Hardener
Screen Printing: Add 15-20% 34392 Retarder and 20% 37172 Hardener
Curing: Air dry within 1 hour or exposure to heat at 180°F
for 5 minutes